Agricultura En Venta

3 pt hitch •hydraulic lift •belt transmission •water-tight ball bearings •13 combs • 6 teeth per comb •12 km/hr max. speed •1 •3m wide x 2 •7m long x 1 •15m high (51"x106"x45")

3 pt hitch •hydraulic lift •belt transmission •water-tight ball bearings •13 combs • 6 teeth per comb •12 km/hr max. speed •1 •3m wide x 2 •7m long x 1 •15m high (51"x106"x45")

3 pt hitch •hydraulic lift •belt transmission •water-tight ball bearings •13 combs • 6 teeth per comb •12 km/hr max. speed •1 •3m wide x 2 •7m long x 1 •15m high (51"x106"x45")

3 pt hitch •hydraulic lift •belt transmission •water-tight ball bearings •13 combs • 6 teeth per comb •12 km/hr max. speed •1 •3m wide x 2 •7m long x 1 •15m high (51"x106"x45")

3 pt hitch •hydraulic lift •belt transmission •water-tight ball bearings •13 combs • 6 teeth per comb •12 km/hr max. speed •1 •3m wide x 2 •7m long x 1 •15m high (51"x106"x45")

Multispeed Gearbox 540 rpm PTO • Rotor revolutions (4 speed): 178-201-227-256 • PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) • Side gear drive in oil bath • Universal three point hitch • Cat I+II • Will offset 8" to the right • 6 blades per flange (side blades are always mounted inwards)

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

Caddy

Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 140-174-215-266 •Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids •Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) •New flank for deeper tillage (B-super model only) •Hardened-steel antiwear skids (B-super model only)

Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 140-174-215-266 •Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids •Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) •New flank for deeper tillage (B-super model only) •Hardened-steel antiwear skids (B-super model only)

Multispeed Gearbox 540 rpm PTO • Rotor revolutions (4 speed): 140-174-215-266 • Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) • Heavy-duty rotor hub • Side gear drive in oil bath • Universal three point hitch • Cat I+II • Will offset 8" to the right • 6 blades per flange (side blades are always mounted inwards) • Long multi-bends rear levelling doors with down-pressure double springs • Pair of skids • Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) • New flank for deeper tillage (B-super model only) • Hardened-steel antiwear skids (B-super model only)

adjustable pressure spring suspension •ability to rake one side only • left or right •hydraulics •tandem axle •205-75/15 tires •55" wheels • 7mm tines - QR models •60" wheels • 7.5mm tines - QRX models •Required - 30-50HP

adjustable pressure spring suspension •ability to rake one side only • left or right •hydraulics •tandem axle •205-75/15 tires •55" wheels • 7mm tines - QR models •60" wheels • 7.5mm tines - QRX models •Required - 30-50HP

16 ft Diameter • Double Skids • Lid Opener • Ladder

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades

Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades

14 ft Diameter • Double Skids • Ladder

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitch adjustable will offset to the right side •Adjustable side skids to control the desired working depth •Parking stand •Cat 1and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life" HD seal provided inside the rotor

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings

Ball Hitch • 235/80R16 Tires • To Fit 36 ft Stripper Header Or Up To 40 ft Draper Header

14 ft Diameter • Double Skids • Ladder

6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

6 "L" blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •1-speed gearbox made by SICMA with conical roller bearings •Side chain drive in oil bath with automatic chain tensioner and sight glass •Lower 3rd point hitches with adjustable width • will offset to the right •Adjustable side skids to determine the desired working depth •Parking stand •Cat I • 3 point hitch •PTO shaft size 4 (Eurocardan) with Slip Clutch protection •Polyester powder coating system

adjustable pressure spring suspension •ability to rake one side only • left or right •hydraulics •tandem axle •205-75/15 tires •55" wheels • 7mm tines - QR models •60" wheels • 7.5mm tines - QRX models •Required - 30-50HP

adjustable pressure spring suspension •ability to rake one side only • left or right •hydraulics •tandem axle •205-75/15 tires •55" wheels • 7mm tines - QR models •60" wheels • 7.5mm tines - QRX models •Required - 30-50HP

14 ft Diameter • Double Skids • Ladder • Horizontal Aeration

THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

Mowing arm adjusts to the angle of the ground • Arm avoids obstacles • Oval-shaped disks • Curved blades • Hydraulic lift • 540 rpm PTO

Main Pipe 210.602 • Pipe 210.601 • (3) Wheel Arms 200.077 • Cap 200.094 • Support 200.118 • Base 210.376 • Parking Stand 200.062 • 35 HP • hardware • manual

Main Pipe 210.602 • Pipe 210.601 • (3) Wheel Arms 200.077 • Cap 200.094 • Support 200.118 • Base 210.376 • Parking Stand 200.062 • 35 HP • hardware • manual

Main Pipe 210.602 • Pipe 210.601 • (3) Wheel Arms 200.077 • Cap 200.094 • Support 200.118 • Base 210.376 • Parking Stand 200.062 • 35 HP • hardware • manual

Main Pipe 210.602 • Pipe 210.601 • (3) Wheel Arms 200.077 • Cap 200.094 • Support 200.118 • Base 210.376 • Parking Stand 200.062 • 35 HP • hardware • manual

Main Pipe 210.602 • Pipe 210.601 • (3) Wheel Arms 200.077 • Cap 200.094 • Support 200.118 • Base 210.376 • Parking Stand 200.062 • 35 HP • hardware • manual

12 in Spacing • C-Shanks • Sweeps • Valmar Airflo 1620 Granular Package Serial Number - 16208232 • Single Shoot

6 ft Blade • 11L-15SL Tires

540 PTO

540 PTO

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT

2-3/8 in Tubing • THE PRODUCT IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSES ONLY AND MAY NOT BE AN EXACT REPRESENTATION OF THE ACTUAL PRODUCT